Effective Methods to Get Rid of Mold From Drywall

Effective Methods to Get Rid of Mold From Drywall

Exposure to mold spores can cause allergies and other respiratory illnesses, so the sooner you deal with mold growth, the better. Now, mold on drywall is difficult to remove but at the same time, if you don’t act fast, repairing the damage caused by the mold to the drywall will put surely empty your wallet!

Here are some ways you can zap out early signs of mold growth but it’s important to seek help from businesses offering mold remediation services to get rid of it for once and for all.

Here are some DIY methods to kill mold on drywall:

Remove the parts which have mold stains on them

Don’t forget to put on protective gear such as masks and gloves before doing this as contact with mold and its spores can be harmful to your health. Carefully mark the areas that have mold growth with a pencil. Draw a box around the stains and then with a utility knife, cut out the marked areas.

It should be at least two wooden beams deep because mold does slowly get inside the walls. After getting rid of the drywall pieces which have mold on them, you can then replace those sections. Don’t forget to vacuum the area as well as the entire room with a vacuum cleaner equipped with HEPA filters.

However, this method of mold removal can damage your walls and might also take up a lot of your time. So, we recommend that you call local mold removal services instead.

Homemade cleaning agents

You can mix water and household detergent to create a soapy solution. After that, use a soft bristle brush and dip it into the solution. Then brush your troubles away!

You can also add 5 parts water to 1 part baking soda and use the solution to remove mold. But if the stains are stubborn, add 1 part bleach to 5 parts water instead. Put it in a spray bottle and don’t forget to wear a mask as its fumes can be dangerous when inhaled. Spray the solution on the mold and then start scrubbing with a dish sponge.

mold-removal-wall-restoration-service-IA

No matter whatever method you try, don’t forget to wear protective gear so that you’re out of harm’s way. Also, open up the doors and windows when you start attacking the mold as the spores can linger around in the room. After your work is done, clean the room thoroughly so that it does not come back in the future!

Simple Methods to Remove Mold from Wooden Furniture

Simple Methods to Remove Mold from Wooden Furniture

Nothing can be more horrible than getting your exquisite wooden furniture infected with mold. You might get them polished and cleaned every year, but when mold strikes, you need some unconventional home solutions to get rid of it all!

Here are some ways to get rid of mold yourself:

  • First of all, put on rubber gloves, a mask, and protective glasses. Mold spores can spread quickly and can cause health problems such as asthma. So don’t forget to take all necessary precautions.
  • Take the piece of furniture outside. This will help prevent mold spread growth in the house.
  • Your wooden furniture needs air and sunlight! Leaving it outdoors will help get moisture away from the furniture. Many cleaning solutions can also release poisonous gases so cleaning it outside just seems to make more sense. Also, sunlight is extremely effective in killing mold and getting rid of the musty odor that comes with it.
  • One thing to keep in mind would be not to place your furniture outside early in the morning. This is because dew can damage your furniture.
  • Vacuum the areas which show signs of mold infestation. This will help get loose mold off your precious furniture.
  • If little mold growth is seen on the surface of the furniture, you can spray a little vodka on it to kill it. After that, let it dry naturally.
  • Use a soft brush to scrub off moderate mold growth. Do this gently if you do not want to damage your wooden furniture. You can also create a soapy solution out of dishwashing liquid and water. Use this to get the mold off! But remember to test the solution first.
  • Stubborn mold can be removed with the help of white vinegar. Mix a little water with white vinegar and spray it on the infected part. Leave it alone for an hour and then wipe with a dry cloth.
  • Mold growth can also be tackled with bleach. This is extremely effective in killing heavy mold growth so make sure you have it stashed up in the house!
  • Mix ¼ cup of detergent with 2 ½ cups of bleach and 5 cups of bleach. Get a brush and use the solution to scrub off the mold. But if the mold has penetrated very deep into the furniture, this strategy might not help.
  • You can also use sandpaper to remove mold. But this might mess up the wood polish so you would have to get the entire thing repolished again.

Mold and mildew need high humidity and warm temperatures to grow and proliferate. So, ensure that you have a dehumidifier in place. You can also call up businesses offering professional mold remediation services to chalk out an effective strategy to keep mold out of your house.

Symptoms of Household Mold Exposure

Symptoms of Household Mold Exposure

There are a lot of things that make us sick. From the common cold to more serious viruses, every year brings new germs. But what if it isn’t a germ that is making us sick? What if it is something else? What if it is something growing in our homes? When a person feels ill they may not immediately consider the cause to be mold. Mold can and does cause serious health problems in many people. It helps to understand the symptoms of household mold exposure so that you can recognize them should they emerge in you or a member of your family.

Exposure to mold has several symptoms including:

  • A skin rash: 

    There are many reasons you may develop a rash, and household mold exposure is one of them. Although you may think that the skin can only become inflamed by direct contact with the mold, this isn’t always the case. You can develop redness in your skin simply from inhaling the fumes from the mold. If you develop a rash on your skin and don’t have an answer as to what caused it, don’t rule out household mold exposure. Head on over to a dermatologist who can help diagnose your condition.

  •  Eye irritation: 

    Eyes are a sensitive organ, and they can easily be affected by mold. Mold can cause both redness and watering of the eyes when exposed. During the spring months, many people associate this with seasonal allergies when in actuality the cause is the mold within their home or office. If your eyes do not clear up when the weather changes, mold could possibly be a culprit.

  • Headaches: 

    Breathing in a mold can cause headaches in some people. This is especially true of people who suffer from migraines. They are very sensitive to certain stimulants and mold can be one of them. If you get recurring headaches and can spot a trend (such as your headache lifts when you leave your home in the morning and returns when you get home), mold could be the cause.

  • Feeling tired: 

    When our bodies aren’t feeling well or are fighting something off, fatigue is often a symptom. If you have been exposed to mold, fatigue may show up. While we all get tired from time to time, long-term fatigue typically is pointing to something deeper. Feeling tired for several days in a row, even when you are getting adequate sleep can be a symptom of mold exposure.

  • A sore throat: 

    Strep throat or household mold exposure? Experiencing a raw feeling when swallowing, or hoarseness when speaking, are both indicative of mold exposure. Mold spores can become lodged in the throat and irritate the sensitive membranes leaving you with a raw and scratchy throat. If your sore throat doesn’t clear up after a week or two, it may be time to head in for a checkup from your doctor.

  • Shortness of breath: 

    Breathing in mold spores can cause respiratory difficulties in some people. This is especially prevalent in those with allergies as well as in those with weakened immune systems. The very young and very old are also at greater risk for a respiratory upset due to household mold exposure. They may even develop asthma or may have asthma and not realize that their asthma attacks are being triggered by the mold in their homes.

  • Runny nose or sinuses: 

    If you are constantly reaching for a tissue to catch your runny nose this can also be a strong symptom of mold exposure. This can be triggered either by an allergy to the mold spores or the membranes of the nose become irritated by the spores. In either case, you may again misdiagnose yourself as having a head cold or seasonal allergies, but if a runny nose persists, consider that the source may indeed be mold. Consider having a visit to your family physician or one who specializes in allergies.

  • Bleeding nose: 

    Although this symptom is rare, it does occur. Some people are more sensitive to certain allergens and those offending irritants cause severe reactions. One of these reactions can be damage to the membranes of the nose resulting in regular bleeding. If this is happening to you, it can be caused by mold within your home.

Do You Suffer From Household Mold Exposure Symptoms?

If you realize that you suffer from several or all of these symptoms on a regular basis, it is advisable that you inspect your home for mold. Household mold exposure is no joke. It can seriously affect your health.

Because the symptoms will likely be worse when you are close the mold itself, it is also wise to track how your symptoms occur. This will help your doctor diagnose the problem.

 If you leave your home each day to go to work and notice that you feel better during the day, this can be a clear indicator that something in your home is causing your distress. Take note of when your symptoms start and stop each day.

The same can be said if you travel and find yourself in better health after you’ve been gone a day or two. Your home shouldn’t make you sick and finding and treating the mold problem will ensure that doesn’t happen.

Track your symptoms over the period of a week or two. If you notice a pattern, it may be time for a professional mold inspection. The sooner you find and remediate the mold, the less damage it will do to your house and your body. Remember that mold isn’t always visible. Just because you don’t notice any mold in your home doesn’t mean that you don’t have it growing somewhere. Also, don’t make the mistake of assuming because your home is new or in good shape that it doesn’t have mold. If there is or has been a source of moisture, the conditions may have caused mold growth.

For a free inspection of your walls to ensure there’s no mold growing inside, contact mold removal and cleaning experts at Iowa Mold Removal Services.

4 Effective Methods to Deal With Mold Growth in Your Car.

4 Effective Methods to Deal With Mold Growth in Your Car.

Mold on car seats can be a nightmare; it’s difficult to remove and the smell
can linger on for quite some time. It can also cause an allergic reaction because mold spores have literally made your car their new home!

Mold and mildew growth is frustrating as it can infect anything and everything, as long as there is some moisture lingering around. It can stain your perfect bathroom walls, ruin your leather carpets, belts, books and more.

How does mold get inside your car?

If you spill something and forget to clean the mess up, you might end up seeing gross mold stains pretty soon. Leaving your sweaty gym clothes or swimwear inside the car, tiny cracks and holes near the edges of doors might also invite mold to camp inside your car. Also, closing the doors and windows after washing the car interiors yourself can lead to mold growth, especially if the carpet and the leather seats have not dried.
Mold reproduces and multiplies by spreading its spores all around. So you need to act fast if you want to salvage your car and prevent further damage to the interiors. Here are some simple solutions to get rid of stubborn mold growth:

Get rid of trash

Before touching the interiors, wear a protective mask and gloves as mold spores are harmful to your health. Collect all the junk which has accumulated in the car over the years! Keep an eye out for coffee stains and more as you will have to target them later while scrubbing as well.

1c37-fyeyqek9470792

Vacuum

Vacuum everywhere – this means under the seats, seat cracks, anywhere you can reach! You can get take out the carpet and vacuum it separately and then vacuum the car more freely.

clean-car-vacuum-today-170814-tease_f7eaee7d164196b0f45af06da1846944

This will help to absorb the mold spores. Ensure that you dispose of the contents of the vacuum bag carefully. Clean it thoroughly too.

Scrub

Now comes the tough part where you actually have to attack the infected parts. Get a stiff brush or a toothbrush and scrub the infected areas so that loose mold gets dislodged. Discard the loose mold carefully and don’t let it come into contact with skin. Don’t forget to vacuum again; in fact, it’d be a good idea to get a new vacuum bag after this!

Vinegar Solution

Mold growth on car upholstery can be difficult to remove. But white distilled vinegar can help you to rescue your car from the fungus. It is inexpensive, yet quite an effective method to get rid of some kinds of mold which creep up on your car when you ain’t paying attention.

maxresdefault (1)

Mix eight parts vinegar to two parts water in a spray bottle. Spray it on the infected parts. Leave it on for 20 minutes. But before doing that, test the solution on a small part to check if it is safe. After 20 minutes, throw in some Borax on the mold to kill it once and for all.

Ensure that you dry it up well. Then get rid of excessive moisture and use a
dehumidifier in your car. DIY methods often simply hide the fact that there is mold in your car; the main problem is never dealt with. The key to complete mold growth
removal and remediation is to find the underlying cause behind it. If you don’t attend to the cracks and leaking windows, mold will definitely make a comeback. So be careful!
Often, the damage is so serious that you might have to get your entire car reupholstered. To avoid such long-term damage and to prevent future mold growth, contact businesses offering mold remediation services. Such professionals have special tools and equipment such as air scrubbers, commercial-strength dehumidifiers, and heavy-duty vacuum cleaners with HEPA filters to zap out the mold for good!

Six DIY Methods to Get Rid of Mold From Your Carpet

Six DIY Methods to Get Rid of Mold From Your Carpet

Came back from a vacation and discovered that your carpet has become infected with mold? Get to action ASAP! That musty smell emanating from your carpet and the unsightly stains isn’t just messing up with the eclectic vibe of the house, it’s also bad for your health. Mold spores can cause breathing problems, asthma, wheezing and even rashes. So the sooner you eliminate it, the better! Additionally, if you start the cleaning process right away, chances are that you’ll actually be able to salvage your carpet as well. Here are some tips on mold removal and remediation:

Open the windows

Before cleaning, ensure that the room is properly ventilated. Keep the windows and doors open. Turn on the fan as well and leave the room for some time. This will lower humidity levels in the room.

Safety First

Don’t forget that contact with mold spores could give you a nasty rash. Put on a face mask and wear protective clothing as well as gloves.

Your carpet needs some sunshine

If your carpet is removable, hang it outside under the sun for at least 24-48 hours. Mold thrives in moisture, and sunlight will help to eliminate the tiny mold spores and reduce moisture.

Baking soda and white vinegar

A simple home remedy, apply baking soda on the infected area. Leave it overnight and then vacuum!

Carpet-Stain-Remove-624x416

White vinegar is another inexpensive option. Spray it on the carpet and then scrub. The next step would be to let it dry. These DIY methods will only be effective in getting rid of some particular types of mold.

Home cleaning solutions

Sweep the carpet to dislodge mold and then start vacuuming. Next, mix dish-washing liquid with water and create a soapy solution. Start scrubbing with a stiff brush and then let it dry naturally.

1_cleanipedia_howtoremovemouldfromfloorsandcarpet_2018_final-1231231.jpg.ulenscale.780x488

Zap it with anti-mold spray

Anti-mold spray can be easily bought from the nearest store. Spray it all over the carpet and let it dry. Also, remember to use an anti-fungal solution to clean the entire room. In this way, future mold growth can be prevented. Use a humidifier as well.

2_cleanipedia_howtoremovemouldfromfloorsandcarpet_2018_final-1231275.jpg.ulenscale.780x488

These methods will help to remove traces of mold growth and the musty odor as well. But an infected carpet indicates that the room might be infected as well. So it’s best to approach professionals for mold remediation to ensure the well-being of your family and to prevent future occurrences of mold growth.